Sign up now
Join now and unlock your hidden features and OEM upgrading experiences.
You must be logged in to submit the form.
P440e to P510e
$954.00
0-60 = from 5.5s to 5.2sPower = from
440ps to 510psTorque = from 620nm to 700nmTop Speed = from 140mph to
150mphPlease note – this is not a “re-map”. This is a genuine power
upgrade. We use the same process that is used on the production line to
ensure that the correct calibrations are uploaded to the
vehicle.Manufacturers specifications are maintained.
P440e to P510e | JLR 3.0L Ingenium PHEV OEM Performance Unlock
JLR fits identical mechanical and electric hardware for both P440e and P510e factory variants. Combustion engine, twin-turbo assembly, 105kW electric motor and high-capacity battery systems all share matching OEM specifications.
Every performance difference exists only through factory PCM engine mapping and CCF configuration restrictions. Our professional DoIP programming activates the dormant factory P510e calibration profile.
This is genuine production-line OEM calibration, not generic aftermarket remapping. It fully preserves dealer diagnostic access, SOTA over-the-air updates and all factory hybrid emission and safety systems.
Core JLR Technical Specifications
- Stock P440e output: 440 PS / 620 Nm combined hybrid torque
- Unlocked P510e output: 510 PS / 700 Nm combined hybrid torque
- Total performance gain: +70 PS power and +80 Nm torque increase
- 0-60mph acceleration improvement: From 6.0s down to 5.4s flat
- Compatible platform: EVA2.0 3.0L Ingenium PHEV (MY22–MY26)
- Updated control modules: PCM, CCF, IPC cluster and central gateway ECU
- Fully retains factory EV range, charging protocols and hybrid safety logic
- 100% reversible coding with secure pre-programming CCF file backup
JLR PHEV Powertrain Engineering Logic
JLR’s 3.0L Ingenium PHEV platform uses unified hardware construction for P440e and P510e trim levels. There are zero mechanical differences between base and high-performance hybrid variants from the factory production line.
JLR engineering teams apply calibrated software limitations to create tiered performance packaging. These factory restrictions limit turbo boost pressure, combustion fuel delivery and electric motor assist output on standard P440e models.
Our dealer-approved CCF configuration adjustment and PCM calibration removes these artificial software boundaries. We activate the official factory P510e hybrid mapping preloaded within stock vehicle firmware.
All OEM thermal protection systems, hybrid safety interlocks and emission compliance protocols remain fully active after programming completion.
Real-World Hybrid Driving Benefits
The P510e OEM calibration delivers significantly sharper throttle response across all drive modes. Improved combined petrol and electric boost enhances mid-range acceleration for overtaking and high-speed cruising.
Dynamic on-road stability and overall vehicle responsiveness are greatly improved. Pure electric driving range, AC charging speed and hybrid regeneration functionality remain completely unchanged from factory stock settings.
As a pure OEM factory calibration, no aftermarket tuning is involved, preserving long-term hybrid system reliability and battery health. The instrument cluster updates fully to display accurate P510e performance metrics for complete OEM consistency.
OEM PCM & CCF Programming Procedure</h2>>
Our certified JLR technicians conduct a full pre-programming network diagnostic scan. We log all existing DTCs and securely back up the original factory CCF configuration file.
A professional DoIP VCI connection establishes encrypted Pathfinder gateway access. We enable factory P510e hybrid powertrain flags and flash official OEM PCM calibration data.
All CAN and Ethernet-linked control modules receive synchronised updated parameters to ensure full system harmony. We clear residual fault codes and validate complete network stability.
A comprehensive road test verifies smooth, consistent hybrid power delivery and fault-free vehicle operation before final handover.
Enjoy faster acceleration, increased torque and enhanced dynamic road performance without aftermarket modifications. All coding is fully reversible, dealer compliant and SOTA update safe.
Secure your P440e to P510e OEM upgrade today for professional JLR-grade hybrid performance results.
Be the first to review “P440e to P510e”
You must be logged in to post a review.
Related products
Performance Upgrade
$600.00
Performance Upgrade
$600.00
Performance Upgrade
$594.00
Performance Upgrade
$594.00
Performance Upgrade
$954.00
Performance Upgrade
$1,800.00
Performance Upgrade
$1,194.00
Performance Upgrade
$600.00
Reviews
There are no reviews yet.