Sign up now
Join now and unlock your hidden features and OEM upgrading experiences.
You must be logged in to submit the form.
ClearSight Mirror System
$1,800.00
Many
customers have been affected by the world wide semiconductor shortage and
have had their orders downgraded so that their vehicles have been with
shipped with the standard interior rear-view mirror.
We can help rectify the problem by installing the ClearSight system. All
factory features will be available as if it was built with it from factory.We
also offer the ClearSight system with HomeLink®  garage door opener.
ClearSight Mirror System
JLR digital rear‑view mirror – specifications, wiring, TOPIx calibration and instant ordering.
What Is the ClearSight Mirror System?
The ClearSight Mirror System is the factory‑approved digital rear‑view solution introduced on Jaguar & Land Rover vehicles from the 2023 model year onward. It replaces the traditional glass mirror with a high‑definition 7.5‑inch LCD that displays a live feed from a rear‑mounted wide‑angle camera. The system integrates with the vehicle’s Advanced Driver Assistance System (ADAS) to provide lane‑keep, blind‑spot and rear‑cross‑traffic warnings.
OEM part number: JPLA‑23M054‑BP. The module is calibrated at the factory to JLR’s “ClearSight” algorithm, which automatically selects the optimal image (wide, normal or zoom) based on vehicle speed and steering angle.
Technical Specifications
Display
- Size: 7.5 in diagonal
- Resolution: 1280 × 720 px (HD) – 16 : 9 aspect
- Panel type: IPS LCD with AH‑LED back‑light
- Brightness: 300 cd/m² (auto‑adjusted)
- Touch: None (read‑only)
Camera & Optics
- Sensor: 1/3 in CMOS, 120° field‑of‑view
- Resolution: 1080 p @ 30 fps (video)
- IR‑filter: Yes (low‑light enhancement)
- Operating temperature: –40 °C to +85 °C
Electrical & Communication
- Supply voltage: 12 V ± 0.5 V (BCM regulated)
- Current draw: 2 A (max)
- Connector: 12‑pin high‑speed FPC (OEM # APS‑D16‑009)
- Bus: CAN‑FD 500 kbps (primary) + Ethernet 100 Mbps (camera feed)
- IP‑rating: IP68 (weather‑proof)
Vehicle Compatibility (MY‑2023+)
- Jaguar F‑TYPE 2023‑2025
- Jaguar XF 2023‑2025
- Land Rover Range Rover 2023‑2026
- Land Rover Defender 2023‑2026
- Land Rover Discovery Sport 2023‑2026
Wiring & Integration
The ClearSight module receives power, CAN‑FD data and Ethernet video via a dedicated harness in the A‑pillar. Pin‑out summary:
| Pin | Signal | Colour | Function |
|---|---|---|---|
| 1 | +12 V (BCM) | Red | Power to mirror electronics |
| 2 | Ground | Black | Chassis ground |
| 3‑6 | CAN‑FD (H) | Green/Yellow | Vehicle data (speed, steering, etc.) |
| 7‑10 | Ethernet TX/RX | Blue | Live video from rear camera |
| 11‑12 | Diagnostic TX/RX | Purple/Orange | TOPIx flash interface |
All signals are protected by a 3 A fuse (F212) at the Body Control Module (BCM) fuse block. The rear camera is mounted on the trunk lid (part # APS‑D17‑011) and is connected to the mirror via the same Ethernet cable.
Calibration & Programming (TOPIx Workflow)
1️⃣ Preparation
- Park the vehicle, engage the hand‑brake and switch the ignition to “ON”.
- Connect a 70 A + battery maintainer to keep voltage stable during flashing.
- Insert a certified
JLR Enet Wi‑Fiadapter into the OBD‑II port. - Launch TOPIx on a laptop with internet access; log in with engineering credentials.
2️⃣ Verify Current CCF
- In TOPIx select Vehicle → Identify → Mirror System (MIR) and click “Read CCF”.
- Find the flag
ClearSightEnabled. On a non‑digital build it will be0.
3️⃣ Enable the Digital Mirror
- Change
ClearSightEnabledto1. - Save the edited CCF and press **Write CCF** – TOPIx recalculates the checksum automatically.
- Run MIR → Self‑Test → Display to confirm the LCD powers up and receives video.
4️⃣ Camera Calibration Wizard
- Open MIR → Calibration → Camera and launch the “ClearSight Calibration Wizard”. The wizard aligns the camera’s horizontal and vertical offsets using the vehicle’s steering‑angle sensor.
- During the wizard the vehicle rolls slowly on a level surface; the system captures reference frames and stores the offset matrix in the CCF.
- When the wizard finishes, the live feed should show a stable horizon regardless of steering input.
5️⃣ Final Validation
- Power‑cycle the vehicle (IGN OFF → ON) and verify the mirror boots without error messages.
- Run a quick “All Systems OK” scan in TOPIx – any DTC such as
C0A80‑96 – ClearSight Plausibilitymust be cleared. - Record the new CCF checksum and calibration date in the service log as proof of a factory‑approved install.
Diagnostic & Verification Tools
| Tool | Purpose | OEM Part / Link |
|---|---|---|
| JLR Enet Wi‑Fi Adapter | DOIP communication for TOPIx | APS‑D07‑001 |
| TOPIx Engineering Access | CCF edit & ClearSight calibration | Daily/Weekly Subscription |
| 70 A + Battery Maintainer | Voltage stability during flash | Standard automotive supplier |
| Rear‑Camera Mount Kit | Physical installation of the camera | APS‑D17‑011 |
Frequently Asked Questions
Can a vehicle without a factory digital mirror be upgraded?
Yes – as long as the BCM contains the “ClearSightEnabled” flag (present on all 2022‑2025 platforms). After installing the hardware, the TOPIx enable‑and‑calibration steps are required.
Will the digital mirror affect fuel consumption?
The module draws a maximum of 2 A (≈ 24 W). When the ignition is off the BCM removes power, so the impact on fuel consumption is negligible.
Is the ClearSight system covered by JLR warranty?
When installed with the correct TOPIx calibration, the system enjoys the standard 12‑month/12 000 km warranty. Keep the calibration checksum as proof of proper installation.
What DTC indicates a mirror fault?
The primary fault is C0A80‑96 – ClearSight Plausibility. After re‑enabling the module and confirming camera alignment, the code can be cleared.
Order the ClearSight Mirror System
Select the part that matches your VIN. The module ships sealed in an anti‑static bag, ready for immediate installation.
- UK Standard Shipping – £429 + VAT (2‑3 business days)
- International Express – £489 + VAT (5‑7 business days)
- Full Installation Service – £549 + VAT (includes labour, TOPIx programming and 12‑month warranty)
Need Help With Installation or Calibration?
Our JLR‑qualified engineers are on‑call 24 / 7. Fill out the short form and we’ll respond within one hour.
Be the first to review “ClearSight Mirror System”
You must be logged in to post a review.
Related products
OEM Upgrade
$600.00
OEM Upgrade
$3,000.00
OEM Upgrade
$300.00
OEM Upgrade
$840.00
OEM Upgrade
$180.00
OEM Upgrade
$600.00
OEM Upgrade
$840.00
OEM Upgrade
$1,800.00
Reviews
There are no reviews yet.